Setting Up the Brother Label Printer with Windows
- Download the Printer Driver for your version of Windows at the Brother Solutions Center
- If prompted, select SAVE (not Run), and put the unzipped file in a place you can easily find.
- Run the D_SETUP program you downloaded and follow the steps below
- Choose Wireless Network Connection on the Connection Type screen and click Next
- Choose Brother Peer-to-Peer Network Printer on the Select Connection screen and click Next
- If you run a Firewall/Antivirus program, select Change the Firewall port settings... on the Firewall/Antivirus detected screen and click Next
- Connect the QL-710W to your computer using the USB cable that came with your printer and select Yes on the Wireless Device Setup screen. Then, click Next
- Select the Checked and confirmed box on the Installation confirmation screen and click Next
- Your wifi network will be detected. Select Yes and click Next
- Confirm your wifi network settings and click Next
- Once your settings have been submitted to the printer, unplug the USB cable and click Finish
- Your label printer is now set up! Now go to Bindo > Settings > Harware > Label Printer
- Tap the Gear button and select Connect
- Your printer is now connected
- Go to Bindo > Inventory > Gear button and tap Print Label to print a label
