Connecting the STAR Receipt Printer to Bindo

The key is to make sure your receipt printer and your iPad are connected to the same network. 

1

Turn off the printer and plug its network cable into one of the network ports on your wi-fi router

2

Turn on the printer and wait for the Ready light to show solid green (not flashing)

3

In Bindo POS, go to Settings > Hardware > Receipt Printer and connect the printer

If your printer is still not showing up in Bindo, then the iPad and the printer are not connected to the same network. To fix this, follow these additional steps:

4

Go to iPad Settings > Wi-Fi

5

At the top, you'll see a check mark next to the connected wi-fi network

6

Tap the blue "i" on the same line as that network

7

Tap Forget This Network

8

Now connect to the correct network and open Bindo POS

9

In Bindo POS, go to Settings > Hardware > Receipt Printer and connect the printer

10

When the green indicator appears, the printer is connected